This tutorial was written
by Sebrina on
January 26,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Barbara Jensen!You can purchased her tubes Here


I am using a mask from Rissa Deisgns. Thanks for the Mask! Mask RDMask08 and you can get it Here


Scrap kit Queen Of the Forrest - by Soxsational Scraps. Thank you so much! You can buy this kit at Exquisite Scraps! Here


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 6 and add your mask and merge down.

Add tube so you can work around it.

Element 61 resize 35% paste to the top right of the mask.

Element 47 resize 35% paste at the bottom of the mask.

Element 24 Paste on the tag change to hard light and opacity to 73% .

Element 30 paste at the top of the mask.

Element 62 resize 35% place between the steps and the lamp.

Element 59 rotate right paste behind the mask layer duplicate 2 times and move to each side of the tag.

Element 11 place to the right center of tag.

Element 45 resize 40% paste at the base of the mask beside the grass.

Element 15 paste at the top right corner.

Element 25 resize 45% paste just behind the steps.

Element 22 resize 35% place on top of the log.

Element 20 resize 30% place behind log to make it look like the log is setting on the grass.

Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
January 26,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Jose Cano!You can purchase his tubes Here


I am using a mask from Rissa Deisgns. Thanks for the Mask! Mask RDMask12 and you can get it Here


Scrap kit Vampyre Erotica - by Kandii Popz Dezignz. Thank you so much! You can buy this kit at Scrap-A-Licious! Here


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 12 and add your mask and merge down.

Add tube so you can work around it.

Scatter paste on mask layer.

Fan rotate to the left paste under the mask layer then duplicate and mirror.

Curtains resize 75% place at the top of the tag.

Rose with Feathers resize 50% place at the bottom left of the tag then duplicate and mirror.

Laced Heart resize 50% place to the left upper center and then tilt to the left.

Clawed Heart resize 40% place on the right side upper center and tilt to the right.

Doodle resize 75% place behind the rose with feathers in the center.

Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
January 23,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Keith Gravey!You can purchase his tubes Here


I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks02 and you can get it Here


Scrap kit Love Bubbles- by Black Widow Creationz. Thank you so much! You can get this freebie kit on Black Widow Creationz blog! Here


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 2 and add your mask and merge down.

Add tube so you can work around it.

Element 18 on mask layer.

Element 12 resize 65% place at the bottom of the mask layer.

Element 10 resize 75% place in the corner of the ribbon on the left side duplicate then mirror and move back to the corner with the other rose bunch.

Element 7 resize 75% place behind the bubble.

Element 17 resize 35% place on the cupcake element.

Element 8 resize 40% place to the right of the ribbon.

Element 3 place on the mask layer to the lower left side and tilt then duplicate and mirror.

Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
January 23,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Elias Chatzoudis. You can purchase his tubes Here.

I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks45 and you can get it Here


Scrap kit ScrapBCS_IB-Marika-1-3- by Babycakes Scraps. Thank you so much! You can buy this kit at CDO Here

Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste Paper 4 and add your mask and merge down and flip.

Add tube so you can work around it.

Element 23 resize 75% paste on lower left of frame over skull.

Element 26 resize 75% paste on lower left of tag just under the word naughty.

Element 31 resize 50% place to the left of skull on frame.

Element 6 resize 93% and again 20% place off center of frame on the left.

Element 14 resize 30% place on the right side of frame.

Element 32 resize 30% just behind the word naughty.

Element 1 put center of the bow in the center of the frame on the right side then duplicate and mirror.

Element 18 resize 25% place over the center of the bow on the right side then duplicate and mirror.

Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
January 23,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Norella!You can purchased her tubes Here

I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks51 and you can get it Here

Scrap kit Be My Love- by Black Widow Creationz. Thank you so much! You can buy this kit at Here

Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Paste Paper PP5 and apply mask.

Add tube so you can work around it.

Element 40 paste at the bottom of mask layer then duplicate and mirror.

Element 20 paste to the center of the tag.

Element 19 paste in center of the bottom of the tag.

Element 2 paste below the word art layer.

Element 31 resize 75% paste in the lower right of tag behind the letter E in the word art layer.

Element 23 resize 50% paste to the upper left of the tag.

Element 24 resize 50% Duplicate and mirror then take Element 28 resize 50% and paste on top of element 24 merge together then move to the upper left of the tag.


Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
January 18,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Barbara Jensen!You can purchased her tubes Here


I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks02 and you can get it Here

Scrap kit Gothic Emily II- by Kandii Popz Dezignz. Thank you so much! You can buy this kit at Here

Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and Paper 7 and add your mask and merge down.

Add tube so you can work around it.

Glitter Splat paste on mask layer.

Sparkles 1 paste on mask layer over the glitter splat.

Fan rotate right paste under mask layer then duplicate and mirror.

Roses rotate right flip paste in the center of the tag then duplicate and mirror.

Heart Rose resize 35% place off center lower left.

Candles resize 35% place off center lower right

Spider resize 50% place upper right on the lace of the fan.

Parasol resize 75% lower opacity to 73 and blend mode to color tilt to the left.

Nailedheart resize 35% place just off center of side right.

Necklace resize 50% place black heart of the necklace to center right

Ribbon 3 resize 85% place below mask layer then tilt to the right then duplicate and mirror.


Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
January 18,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

I am using a mask from Millie's Psp Madness. Thanks for the Mask! Mask MPM Mask 12 and you can get it Here

Scrap kit Death Becomes Us- by Soxsational Scraps. Thank you so much! You can buy this kit at Exquisite Scraps! Here

Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 1 and add your mask and merge down.

Element 1&2 Resize 75% and place both on the left side bottom layering each other.

Element 29 & 30 resize 50% place in the lower right layering each other.

Element 48 resize 40% place to the upper right of the tag.

Element 67 add gradient glow and place center of the tag at the top.

Element 71 paste across the couple.

Element 31 resize 75% and paste on mask layer.

Element 23 paste in the center bottom.

Element 06 paste on the mask layer.

Element 73 resize 35% paste on top of skulls.

Element 12 & 9 resize both 50% paste in a work area and layer the roses. Place the black on top of the purple one then merge together... Rotate right and place on the right center of the tag.


Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
January 19,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Keith Gravey!You can purchase his tubes Here


I am using a mask from Rissa Deisgns. Thanks for the Mask! Mask RDMask12 and you can get it Here


Scrap kit Love Me Now- by Black Widow Creationz. Thank you so much! You can buy this kit at Black Widow Creationz! Here


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 3 and add your mask and merge down.

Add tube so you can work around it.

Element 12 paste in the center top of mask.

Element 28 resize 75% paste center bottom.

Element 7 resize 95% paste on the mask layer.

Element 32 place on the left side beside the letter U.

Element 22 place just above the letter I.

Element 16 rotate right flip paste on the mask layer.


Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
January 18,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Rachael Huntington, I purchased her tubes when she was at CILM. I can not find where she is selling now.

I am using a mask from Rissa Deisgns.Thanks for the Mask! Mask RDMask07 and you can get it Here


Scrap kit ScrapBCS_IB-PinUpToons-January2012-bt- by Babycakes Scraps. Thank you so much! You can buy this kit at CDO Here

Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste Paper 4 and add your mask and merge down.

Add tube so you can work around it.

Element 8 paste on to the mask.

Element 5 resize 75% and place at the lower right on the ribbon.

Element 9 Mirror and flip paste on the tag.

Element 1 paste on the mask layer.

Element 25 add gradient glow medium and paste top right of the tag.

Element 27 resize 50% place in the bottom center of the ribbon frame.

Element 11 resize 27% place at the top left of the tag on the ribbon.

Element 28 resize 92% then resize again 75% place on the left side of the tag.

Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
January 8,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Elias Chatzoudis with one of his freebie tubes!You purchased his tubes Here

I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks90 and you can get it Here

Scrap kit Gothic Beauty- by Kandii Popz Scraps. Thank you so much! You can buy this kit at Scrap-a-licious! Here

Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 9 and add your mask and merge down.

Add tube so you can work around it.

Rose paste at the bottom of mask.

Stars paste then duplicate and mirror.

Lacedheart resize 75% place at top in the center.

Eyes place in the center of the tag.

Streak Of Light duplicate and merge and place the end of the light at the bottom right of the tag.

Rose petals put below mask layer move to where you can see it on the bottom of the tag then duplicate and then flip and mirror.

Skull2 mirror resize 40% place just to the left just above the eyes.

Lips with Jewel resize 50% place to the left just below the eyes.

Ribbon1 resize 50% place just above the eyes and tilt to the left then duplicate mirror and flip.

Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
January 16,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Barbara Jensen!You can purchased her tubes Here

I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks82 and you can get it Here

Scrap kit Cold Loving- by Black Widow Creationz. Thank you so much! You can buy this kit at Here

Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Paste Paper PP5 abd apply mask.

Add tube so you can work around it.

Element 3 just paste it on the tag.

Element 25 resize 50% tilt and place center right on side of tag duplicate and mirror and move the layer to cross over each other.

Element 13 resize 50% and place in the center of the bottom of tag.

Element 22 resize 30% and place center left of tag.

Element 1 resize 50% and Element 8 resize 50% place element 1 in center top of tag then add element 8 to the right and tilt a little right then duplicate and mirror.

Element 12 paste behind mask layer and move to top center of left side the duplicate mirror then duplicate and flip then duplicate and mirror one last time (you should have 4 layers now)

Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
January 16,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Barbara Jensen!You can purchased her tubes Here

I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks86 and you can get it Here

Scrap kit After Midnight- by Babycakes Scraps. Thank you so much! You can buy this kit at Here

Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste Swirl Paper and add your mask and merge down.

Add tube so you can work around it.

Fan resize 65% place bottom left of tag tilt fan 1/2 way to the left.

Solid butterfly resize 50% place at top left of of tag and tilt to the left.

Frangipani flip resize 50% tilt to the right and place at top right of tag.

String resize 73% and resize again at 50% tilt to the right and place on the right side of the tag.

Painted rose 2 resize 30% place to the left center then duplicate and mirror.



Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
January 12,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Keith Gravey!You purchased his tubes Here

I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks45 and you can get it Here

Scrap kit Keep On Rockin Pink- by Babycakes Scraps. Thank you so much! You can buy this kit at Bellazingarostudio! Here

Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 6 and add your mask and merge down.

Add tube so you can work around it.

Round Frame 3 resize 75% and paste on the tag.

Word resize 50% Duplicate it and merge it down add gradient glow and paste to the lower right of the frame.

Pin resize 65% place at the top right of the frame to make it look like the pin is going thur it.

Guitar resize 66% and again at 50% place on the left side of frame and tilt to the right.

Rock (word art) resize at 50% place to the top left of frame.


Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
January 12,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks02 and you can get it Here

Scrap kit Till Death Do Us Part- by Kandii Popz Scraps. Thank you so much! You can buy this kit at Mystical Scraps! Here

Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 1 and add your mask and merge down.

Bride resize to 40% place to the left bottom of tag.

Groom resize 40% place beside the Bride.

Banner resize 50% place center top of the tag.

Wedding Cake resize 35% place to the right side of the tag.

Sparkles2 resize 50% place in center of tag.

Bell resize 50% place to the right of the tag just under the banner and over the Wedding Cake.

Winged Heart resize 50% place on the left side of the tag above the Bride and Groom.


Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
January 8,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Keith Gravey!You purchased his tubes Here

Here is the mask that you will need... I can't remember where I got this mask so if this is your mask please email me and I will give you credit! Thanks
Scrap kit Miss America- by Black Widow Creationz. Thank you so much! You can buy this kit at Black Widow Creationz! Here

Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 3 and add your mask and merge down.

Add tube so you can work around it.

Element 7 place in the center of the background layer.

Element 20 resize 50% and paste to the top right of the tag.

Open Element 36 and 33 resize Element 36 at 85% then paste it on Element 33 and tilt it to the left.

Open Elemnet 1 and resize 75% and paste on the Elements 33 and 36 and tilt it to the right .

Now merge the group of 3 down and paste to the left top of the tag.

Element 41 resize 50% and place at the lower left of the tag.

Element 37 resize 40% place the bottom right of the tag.

Element 40 resize 50% and place bottom center of the tag.

Element 18 resize 40% and place at the right center of the tag and tilt to the right.


Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
January 8,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Keith Gravey!You purchased his tubes Here

I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks02 and you can get it Here

Scrap kit Girl About Town- by Kandii Popz Scraps. Thank you so much! You can buy this kit at Scrap-a-licious! Here

Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 6 and add your mask and merge down.

Add tube so you can work around it.

Town resize 50% place at center bottom of tag.

Glitter Circle resize 75% place behind the mask layer.

Drink resize 50% place on the top of the town in the center of it.

Light Burst resize 75% place under Glitter Cirle..

Music resize 75% paste on top tag.

Cell resize 30% place at the top right center of tag.


Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
January 8,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Keith Gravey!You purchased his tubes Here

I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks144 and you can get it Here

Scrap kit Snow Bird In Blue- by Babycakes Scraps. Thank you so much! You can buy this kit at Bellazingarostudio! Here

Optional Plugins Gradient Glow and Glass.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 5 and add your mask and merge down.

Add tube so you can work around it.

Element 60 resize 57% place behind the mask layer.

Frosty word art tilt it a little to left and place across the tag area.

Now let's make a small snow globe on the tag.... .

Take element 40 resize 75% place a lower left of tag then duplicate.

Element 9 resize 53% resize again 50% and then resize 2 more times at 75%.. Place element over the snowball.

Take the duplicate copy and bring up over element 9 .... then add Glass Settings as stated below.

Glass Settings Under Basic Tab Bevel Width 30.00 Smoothness 75 Bevel Placement- Inside Marquee Edge Darkening 30 Gradient 35 Refraction 50 Opacity 0 Tinting 50 Glass Color White... Change the opacity of the top snowball to 50..... Apply Glass setting to both snowballs.

Element 11 resize 56% then again to 30% and place over the snowballs then duplicate and merge together.

Element 28 resize 35% and place at the top center of tag.

Element 106 resize 75% and place at the bottom right of the tag.

Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com