This tutorial was written
by Sebrina on
March 20,2014
Any resemblance to another tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Keith Gravey!You can purchase his tubes Here


I am using a mask from Millie's Psp Madness. Thanks for the Mask! Mask MPM Mask 12 and you can get it Here


Scrap kit Bitch With Attitude- by Kandii Popz Designz. Thank you so much! You can get this kit at Scrap-A-licious. Here

Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and Paper 15 and add your mask and merge down.

Add tube so you can work around it.

Glitter resize 75% paste on the tag.

Bubbles paste on the tag on the right side.

Boots resize 75% paste on the left side of the tag.

Word Art 1 resize 50% paste on the upper left of the tag.

Sparkles 2 paste on the tag.

Notes mirror paste along the bottom of the tag.

Star Chain paste on the right side of the tag.

Glitter Stars on String paste on left under word art layer.

Butterfly resize 75% place in the upper right corner of the tag.

Bunny place in the lower left corner of the tag.

Lips resize 75% place in the lower left corner of the tag.


Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And please send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
March 20,2014
Any resemblance to another tutorial is purely coincidental.

Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Keith Gravey!You can purchase his tubes Here


I am using a mask from Millie's Psp Madness. Thanks for the Mask! Mask MPM Mask 07 and you can get it Here


Scrap kit Rock Girls Rule - by Kandii Popz Designs. Thank you so much! You can get this kit at Kandii Popz Designs blog. Here

Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and Paper 6 and add your mask and merge down.

Add tube so you can work around it.

Wire paste on the tag.

Sparkles 2 paste on the tag on the right.

Keyboard resize 85% paste at the bottom of the tag.

Music Notes resize 85% paste on the keyboard.

Star paste in the center of the tag.

Cross resize 50% paste at the top left of the tag.

Barbed heart resize 75% paste top right corner of the tag.

Flamed Skull resize 50% mirror and paste lower right of the tag on the keyboard.

City resize 60% paste behind the keyboard.

Heart resize 50% paste in the lower left of tag.

Note paste on the right side middle of the tag.


Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And please send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
March 20,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!



For this Tutorial I'm using the art of PinUp Toons!You can purchase his tubes Here



I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks102 and you can get it Here


Scrap kit Spring Romance by Amy Marie. Thank you so much! You can buy this kit Here


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 10 and add your mask and merge down.

Element 102 paste on the tag.

Element 119 paste at the top of the tag then duplicate and flip .

Element 118 duplicate and merge down then paste at the top of the page and duplicate and flip.

Element 41 resize 50% paste in the upper left of tag and duplicate and mirror.

Element 89 paste behind the mask layer at the top then duplicate and flip.

Element 71 paste on the lower right of tag.

Element 73 resize 50 % paste in the lower left of tag.

Element 125 resize 75% paste in the lower right hand corner behind the glass.



Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And please send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
March 16,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Joel Adams!You can purchased his tubes Here


I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks45 and you can get it Here


Scrap kit Spring Rainbow- by Soxsational Scraps. Thank you so much! You can buy this kit at Exquisite Scraps! Here


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 11 and add your mask and merge down & flip.

Add tube so you can work around it.

Grass mound paste below cirlce on left then duplicate and mirror.

Rocks paste on the grass layer.

Flower frame 2 resize 75% paste in the center of the tag.

Flower scatters paste in the center of the tag.

Owl resize 35% paste at the top left of the tag.

Tulips resize 50% paste under the grass layer on the left side.

Leaf1 paste in center of the tag under the frame.

Tree resize 50% paste on the right side of the tag.

Bird resize 35% and mirror paste on the tree.

Balloons1 resize 50% paste on the right side inside the frame.

Balloons2 mirror resize 50% paste beside Balloons1 merge together then duplicate and mirror.



Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And please send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

. This tutorial was written
by Sebrina on
March 16,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Barbara Jensen!You can purchase her tubes Here


I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks89 and you can get it Here


Scrap kit ScrapBCS_IB-Anna Marine-45-2- by Babycakes Scraps. Thank you so much! You can buy this kit at CDO! Here


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 4 and add your mask and merge down.

Add tube so you can work around it.

Element 13 paste on the tag.

Element 5 paste on the tag.

Element 28 resize 85% paste at the bottom of the tag and add gradient glow fat to it.

Element 1 resize 60% paste at the top left of the tag.

Element 8 resize 60% mirror paste on the right side of the tag.

Element 10 resize 50% paste on the left side of the tag.

Element 15 resize 50% place on the right side of the tag.

Element 24 resize 60% place at the top right of the tag.

Element 22 resize 50% place center left of the tag.



Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And please send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
March 16,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!



I am using the art work of Elias Chatzoudis . You can buy his tubes Here!



I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks144 and you can get it Here


Scrap kit Chick Named Diva by Amy Marie. Thank you so much! You can buy this kit Here


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 17 and add your mask and merge down.

Element 78 Mirror and paste in the center of the tag.

Element 77 paste in the center of the tag.

Element 44 paste at the right side of the tag.

Element 26 resize 50% paste upper left hand corner.

Element 58 resize 75% paste in lower right hand corner.

Element 59 resize 65% paste on element 58 in lower right hand corner .

Element 3 resize 35% paste on the candles.

Element 163 resize 50% paste lower left hand corner.

Element 61 resize 50% paste lower left hand corner on top of boxes.

Element 69 resize 50% paste upper right corner of the tag.

Element 139 resize 75% paste middle left of the tag beside the candles.

Element 23 resize 65% paste middle center of tag duplicate & change blend mode to hard Light and merge down.

Element 90 resize 75% paste on the mask layer.

Element 8 paste on the tag.



Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And please send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
March 16,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Keith Gravey!You can purchase his tubes Here



I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks89 and you can get it Here

Scrap kit Shake Your Shamrocks- by Black Widow Creationz. Thank you so much! You can get this kit at Black Widow Creationz. Here

Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and Paper 1 and add your mask and merge down.

Add tube so you can work around it.

Element 13 paste on the mask layer.

Element 28 in the center of the tag.

Element 18 resize 75% paste on the tag tilt to the left.

Element 9 paste on the tag and tilt to the right.

Element 24 resize 50% paste on the left side and then duplicate and mirror.

Element 12 rotate to the right paste at the bottom center of tag.

Element 19 paste along the bottom of the tag.



Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And please send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
Febuary 28,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!



I am using the art work of Joel Adams. You can buy his tubes at CDO! Here



I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks02 and you can get it Here


Scrap kit ScrapBCS_IB-Lacy Clagg-2-3 by Babycakes Scraps. Thank you so much! You can buy this kit at CDO! Here


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 4 and add your mask and merge down.

Element 5 paste in the center of tag.

Element 18 paste at the bottom of tag.

Element 1 resize 50% paste upper left of the tag.

Element 21 resize 50% paste upper right of the tag.

Element27 resize 50% pste in the upper middle of the tag.

Element 14 resize 40% paste on the right side of the grass.

Element 22 resize 65% mirror paste to the left of the grass.

Element 11 paste under the mask layer to the right then duplicate flip and mirror.

Element 10 Mirror paste under the mask layer on the duplicate and mirror.

Element 12 resize 65% paste on the star.

Element 7 resize 35% place on the mushroom house.

ELement 20 resize 45% place to hang on the g in laugh.


Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And please send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
March 13,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of PinUp Toons!You can purchase his tubes Here


I am using a mask from Rissa Deisgns. Thanks for the Mask! Mask RDMask08 and you can get it Here


Scrap kit Spring Chick by Amy Marie. Thank you so much! You can buy this kit Here


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 30 and add your mask and merge down.

Add tube so you can work around it.

Element 7 Paste on the mask layer.

Element 132 Paste in the center of tag.

Element 2 paste at the top of the tag then duplicate and mirror.

Element 123 resize 75% paste on right bottom corner of the tag.

Element 119 paste on the left side of the tag.

Element 116 paste in the center of the tag.

Element 120 resize 50% paste lower left on the flower.

Element 108 resize 35% paste upper right of the tag.

Element 83 resize 35% paste in the lower right on the flowers.

Element 137 rotate right resize 50% paste in the center of the tag.

Element 145 paste in the center of the tag.

Element 97 resize 50% paste upper left of tag.


Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And please send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
March 7,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Zindy Neilsen!You can purchase her tubes Here


I am using a mask from Weescotslass Creations. Thanks for the Mask! Mask WSL MASK120 and you can get it Here


Scrap kit Forbidden Love- by Black Widow Creationz. Thank you so much! You can get this kit for FREE Here!


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 14 and add your mask and merge down.

Add tube so you can work around it.

Element 60 paste on the mask layer.

Element 10 flip paste below the mask layer to the right side.

Element 42 paste on the right side and duplicate and mirror.

Element 27 resize 75 % and mirror and Element 26 resize 75% layer the roses paste on the left hand side corner.

Element 13 resize 50% make it "hang" in the top left hand corner.

Element 39 mirror and resize 50% ELement 38 resize 50% merge together and paste in the lower right hand corner of the tag.

Element 12 resize 50% earse chain place at the center top.


Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And please send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
March 7,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Jamie Kidd!You can purchased his tubes Here


I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks89 and you can get it Here

Scrap kit Tough Love- by Black Widow Creationz. Thank you so much! You can get this kit at Black Widow Creationz. Here

Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and Paper 1 and add your mask and merge down.

Add tube so you can work around it.

Element 31 paste on the mask layer.

Element 13 resize 75% paste at the bottom of the tag.

Element 24 resize 75% paste in the center of the tag.

Element 5 resize 75% paste in the upper right of the tag.

Element 20 resize 75% paste in the upper left of the tag.

Element 16 resize 50% paste in the lower left of tag.

Element 36 resize 75% paste in the center of the tag.

Element 9 resize 40% paste in the lower left conrner of the tag.

Element 21 resize 40% paste in the upper middle of the tag.



Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And please send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
March 7,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!



I am using the art work of Elias Chatzoudis . You can buy his tubes Here!



I am using a mask from Millie's Psp Madness. Thanks for the Mask! Mask MPM Mask 07 and you can get it Here


Scrap kit Wonderland by Amy Marie. Thank you so much! You can buy this kit Here


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 13 and add your mask and merge down.

Element 3 Mirror and place at the bottom of the tag.

Element 24 Place at the top of the mask layer.

Element 105 paste on the mask layer on the left.

Element 26 Place in the center of the tag.

Element 46 Place in the upper right of the tag.

Element 98 resize 50% Place in the lower left of the tag.

Element 45 resize 95% Place on the tag.

Element 48 resize 75% Place behind the grass on the right.

Element 47 resize 75% Place behind element 48 on the grass.

Element 49 Place behind the mask layer.

Element 14 resize 50% Place on right side of the tag.

Element 94 resize 50% Place at the bottom of the tag in the middle.


Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And please send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
March 3,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of PinUp Toons!You can purchase his tubes Here


I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks89 and you can get it Here


Scrap kit ScrapBCS_PinUpToons-Package-175 - by Babycake Scraps. Thank you so much! You can get this kit Here!


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 19 and add your mask and merge down.

Add tube so you can work around it.

Element 63 paste on the mask layer then duplicate and mirror.

Element 24 resize 21% and again 70% paste on the mask layer.

Element 48 resize 70% place at the bottom of the tag.

Element 52 resize 50% place behind the word art on the left.

Element 72 resize 60% place beside word art on the right.

Element 45 paste on the center of the mask layer.

Element 11 mirror resize 60% paste upper left of the tag.

Element 37 resize 70% paste just above the boots.

Element 43 resize 75% add gradient glow place at the top of tag.

Element 10 paste on left side top under the cuffs.



Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
March 3,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Barbara Jensen!You can purchase her tubes Here


I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks89 and you can get it Here


Scrap kit Spring Things - by Amy Marie. Thank you so much! You can get this kit Here!


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 89 and add your mask and merge down.

Add tube so you can work around it.

Element 52 duplicate and merge together paste on the mask layer in the center.

Element 192 place on the mask layer tilt to the right.

Element 196 place at the bottom of the tag.

Element 199 resize at 50% place on the left side of the tag.

Element 174 resize 90% paste on the tag under the grass.

Element 145 resize 50% paste under the Arch.

Element 14 paste on the grass.

Element 154 resize 70% paste on the grass.

Element 74 mirror and resize 70% place in the upper right of the tag.

Element 204 resize 50% tilt to the right and place on the left side of the tag in the upper middle.

Element 93 resize to 10% duplicate and paste all over the tree.


Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
March 1,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!

For this Tutorial I'm using the art of Zindy Neilsen!You can purchase her tubes Here


I am using a mask from Designs By Vaybs. Thanks for the Mask! Mask DBV Maks02 and you can get it Here


Scrap kit Addicted 2 Love - by Black Widow Creationz. Thank you so much! You can get this kit for FREE Here!


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 8 and add your mask and merge down.

Add tube so you can work around it.

Element 10 place at the bottom of the mask layer and add gradient glow fat.

Element 33 and 32 resize 50% mirror element 32 and place over element 33 and place at the top right of the tag.

Element 30 paste across the mask layer.

Element 13 paste over element 30 and lower the opacity to 50% and mirror.

Element 3 resize 75% and place beside the letter L.

Element 4 resize 50% and place off center of the candle.

Element 2 resize 35% and place off center of the candles.


Element 9 resize 50% place on the mask layer towards the upper left of the tag.


Element 18 resize 35% place above the E in love.


Element 28 resize 95% paste below the mask layer and tilt to the right.


Element 29 resize 95% paste below the mask layer and tilt to the left.


Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com

This tutorial was written
by Sebrina on
Febuary 28,2014
Any resemblance to another
tutorial is purely coincidental.
Do not copy this tutorial and post it through any group or claim it as your own. Please just pass my blog for the tutorials!



I am using the art work of Jennifer Janesko. You can buy her tubes at CDO! Here



I am using a mask from Millie's Psp Madness. Thanks for the Mask! Mask MPM Mask 12 and you can get it Here


Scrap kit ScrapBCS_IB-JenniferJanesko-150-2- by Babycakes Scraps. Thank you so much! You can buy this kit at CDO! Here


Optional Plugins Gradient Glow.


This tutorial assumes you have a working knowledge of PSP.

Lets get started

Open a new image 600 x 600

Copy and paste paper 5 and add your mask and merge down.

Element 31 paste in lower left of the tag at the base of the mask duplicate and mirror.

Element 2 resize 50% place at the lower left of the tag then resize again at 75% then place on top of the bigger candle.

Element 8 paste at the upper right of the tag.

Element 21 mirror place to the right on the tag.

Element 26 tilt to the left and place in the upper left of the tag.

Element 27 resize 75% rotate right and paste under the mask layer then duplicate 2 more times and line up side by side under the mask layer.

Element 1 paste in the center of the tag.



Now add a drop shadow to all layers



*****Optional for your tube******

I was turned on to this trick by a good friend of my named Kim. You can check her out Click Here See Kim!

On your tube if you want to make it kinda pop out a little more here is something you can do.

Duplicate your tube layer on the copy layer add a gaussian blur of 2.00 and move it below the original layer. On the original layer blend mode to hard light and change the opacity to 73. Merge the layer down and sharpen!

Crop/resize tag to your preference - add copyright/license & watermark & name ..Save as PNG or JPEG

Please leave me a comment to let me know how you liked my tutorial. And plese send me your results and I will post them up! I would love to see your results! My E-mail is TimeOfYourLifeScraps@yahoo.com